<big id="bqcd9"></big>

<u id="bqcd9"></u>
<strike id="bqcd9"></strike><code id="bqcd9"></code>

      <th id="bqcd9"></th>
      <tr id="bqcd9"></tr>
    1. 產品詳情

      帶DP接口PROFIBUS激光測距傳感器

      • 產品名稱:帶DP接口PROFIBUS激光測距傳感器
      • 產品型號:LDM42P
      • 產品廠商:耶拿
      • 產品文檔:
      你添加了1件商品 查看購物車
      簡單介紹
      帶DP接口PROFIBUS激光測距傳感器 LDM42P

      帶DP接口PROFIBUS激光測距傳感器

      的詳細介紹

      帶DP接口PROFIBUS激光測距傳感器 LDM42P


      帶DP接口PROFIBUS激光測距傳感器 LDM42P

      帶DP接口PROFIBUS激光測距傳感器 LDM42P


      The LDM41P is an optoelectronic distance measuring device for industrial applications with integrated Profibus DP interface.
      It works contact-free on the principle of comparative phase measurement (amplitude modulation) and facilitates precisely accurate measurement of distances.

      Both, the LDM41P and the LDM42P distinguish themselves through high precision as well as high independence from the surface of the measuring object. The red, well visible laser beam allows for easy alignment. The LDM42P has been further developed for fast distance measurements on white surfaces.
      Through the integrated Profibus DP interface it is possible to read in data of several devices into a control easily. 


      Applications
      • Distance measurement and determination of position
      • Diameter measurement of rolls / coils 
      • Fill level measurement 
      • Position control 
      • Monitoring of safety-relevant parts 
      • Monitoring of lifting plants / lifting height measurement and positioning of elevators
      • Monitoring and positioning of cranes and conveyor systems


      • Millimeter precise measurement on various surfaces 
      • High range reflector-less distance measurement 
      • With additional reflectors on the target object measurements over 100 m 
      • Operation in extreme ambient temperatures with high precision and range
      • High supply voltage range between 10 V and 30 V DC with low power consumption 
      • Safe operation through laser class 2 
      • Easy adjustment through visible laser beam
      • Common flexible interface cable for supply voltage, switching output and analog output 
      • Customized parameterization via PC 
      • Display of measured values in meters, feet, inches and others due to free scaling
      • Robust, compact housing, easy to install, protection standard IP 65

      Measuring range1

      0.2 m ... 30 m on almost all natural surfaces, over 100 m achievable depending on the degree of reflection of surfaces 

      Measuring uncertainty2 ±2 mm under defined measuring conditions3
      ±3 mm (+15°C ... +30°C)
      ±5 mm (-10 °C ... +50 °C)
      Resolution

      0.1 mm, freely scalable

      Reproducibility4

      0.5 mm

      Measuring time

      0.24 s ... 6 s adjustable or automatically in mode DT
      0.1 s in mode DW on white surface
      20 ms in mode DX on white surface (only LDM42P) 

      Laser class Laser class 2 acc. to DIN EN 60825-1:2001-11
      Laser divergence5 0.6 mrad
      Operating temperature -10 °C ... +50 °C
      Storage temperature -40 °C ... +70 °C
      Supply voltage

      10 V ... 30 V direct currents

      Power consumption Ca. 3.5 W
      Serial interface6

      RS232 or optional RS422, max. Baud rate 38400, ASCII, setting of measuring functions, scaling, measuring time via commands, display of measured values, internal temperature of the device and error code

      Fieldbus6 Profibus DP-V0 
      12 MBit, Autodetect
      Switching output

      Programmable switching threshold and hysteresis, "high side" switch, maximum load 0.5 A

      Housing material

      Aluminum anodized

      Size (LxBxH) 187 mm x 96 mm x 50 mm
      Weight 850 g
      Protection class IP 65
      Shock resistance 10 g / 6 ms (DIN ISO 9022-3-31-01-1)
      MTBF 30,000 hours at 25 °C
      Mounting

      4 drill holes for M6 screws, 100 mm x 85 mm


      Bemerkungen zu den technischen Daten: 
      1 Dependent on target reflectance, influence of extraneous light and atmospheric conditions
      2 Statistical spread of 95 %
      3 Measurement on planar, vertical white surface at standstill or in continuous movement, + 15 °C to +30 °C
      4 Dependent on target reflectance, influence of extraneous light and atmospheric conditions
      5 At a distance of 10 m the beam diameter is 6 mm, at 100 m it is 6 cm
      6 Please specify option RS422 when placing the order


      標題:
      內容:
      聯系人:
      聯系電話:
      Email:
      公司名稱:
      聯系地址:
       
       
      注:1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
      2.如有必要,請您留下您的詳細聯系方式!

      鄂公網安備 42010502000348號

      99久久免费国产精品2021

      <big id="bqcd9"></big>

      <u id="bqcd9"></u>
      <strike id="bqcd9"></strike><code id="bqcd9"></code>

          <th id="bqcd9"></th>
          <tr id="bqcd9"></tr>