<big id="6sxgx"></big>

    <tr id="6sxgx"><option id="6sxgx"></option></tr>

    1. <center id="6sxgx"><em id="6sxgx"></em></center>

        <code id="6sxgx"><small id="6sxgx"></small></code>

          <big id="6sxgx"><nobr id="6sxgx"></nobr></big>

        1. <code id="6sxgx"></code>
        2. 產品詳情

          Noptel遠距離激光測距傳感器

          • 產品名稱:Noptel遠距離激光測距傳感器
          • 產品型號:LRX-2**
          • 產品廠商:芬蘭noptel
          • 產品文檔:
          你添加了1件商品 查看購物車
          簡單介紹
          Noptel遠距離激光測距傳感器 LRX-2** 湖北Noptel遠距離激光測距傳感器 LRX-2**

          Noptel遠距離激光測距傳感器

          的詳細介紹
          Noptel遠距離激光測距傳感器 LRX-2** 湖北Noptel遠距離激光測距傳感器 LRX-2**


          Noptel遠距離激光測距傳感器 LRX-2** 湖北Noptel遠距離激光測距傳感器 LRX-2**



          Noptel遠距離激光測距傳感器 LRX-2** 湖北Noptel遠距離激光測距傳感器 LRX-2**
          Technical specifificaons 
          The product requires export license. Pictures are referential. Specifications are subject to change without notice. Doc.:M43332BE
          Performance Characteriscs Unit LRX-2** Note
          Laser safety class - 1 Eye safe
          Wavelength μm 1.5 
          Measurement range m 50 - 32 000 
          Measurement range 
          Standard target 
          m 10 000 
          Target size 2.3 x 2.3 m, visibility 15 km, target re-
          flflecvity 30%, detecon probability >90%
          Exncon rao dB 41.0 
          Large target @ 500 m, visibility 23 km, target reflflec-
          vity 85%
          Measurement me s 0.7 / 1.7 Typical / Max. performance measurement two 
          mes in ten seconds due to eye-safety
          Connuous measurement rates Hz 
          1, 4, 10, 20, 
          100, 200 
          With reduced measurement ranges
          Precision m 0.5 - 1.5 Depending on the distance and target reflflecvity
          Beam divergence mrad 0.35 
          False detecon rate % < 1 
          Target discriminaon m < 30 Depending on the received signal level
          Range gang resoluon m 1 
          Operang temperature °C -32 - +60 
          Storage temperature °C -40 - +71 
          Mechanical characteriscs Unit LRX-2** Note
          Size (L/W/H) mm 88 x 53 x 37 
          Weight g 136 
          Alignment retenon mrad 0.2 Within operang temperature range
          Alignment pointer nm 635 Laser Class 1
          IP Protecon - N/A 
          Electrical characteriscs Unit LRX-2** Note
          Serial interface - RS422 Connector type: Molex 53261-1071 
          Supply voltage V 7 - 30 
          Start-up me ms < 50 
          Power consumpon 
          during measurement 
          W < 4 
          Power consumpon 
          in Stand-by mode 
          W < 0.2 
          Unit can be completely shut down by external sig
          nal to further minimize power consumpon
          This document describes mechanical, optical, electrical and software interface of the 
          following Noptel LRX family modules:
          LRX-20A
          LRX-2**
          LRX-42A
          Figure 1. LRX-20A and LRX-2** 
          Figure 2. LRX-42ADocument number
          OS43418IE
          Document nam
          1.2.1 Class 1 modules
          The LRX is eye-safe in every measurement mode. 
          The system which uses Class 1 LRX module shall have labelling according IEC 60825-
          1:2014 as follows:
          Text borders and symbols are recommended to be black on a yellow background, but for 
          Class 1 this color combination need not be used.
          The labels shall be durable, permanently affixed, legible, and clearly visible during
          operation, maintenance or service, according to their purpose.
          If the size or design of the product makes labelling impractical, the label shall be included 
          with the user information or on the package. 
          Direct printing or engraving of equivalent labels on the laser product or panels is 
          acceptable.
          Table 4: Molex connector pinout
          pin # IN/OUT Description
          1 IN RS-422 RX+ (or UART TXD) *
          2 IN RS-422 RX- (or RS-232 RX or UART RXD) *
          3 GND RS-422 GND 
          4 OUT RS-422 TX+ *
          5 OUT RS-422 TX- (or RS-232 TX) *
          6 GND Case/Supply ground *2
          7 & 8 IN Supply voltage input (6.5 - 30V). Reverse voltage protected. See Table 5
          for power consumption.
          9 GND Case/Supply ground *2
          10 IN Shutdown when pulled down <0.5V, Power On when > 1.1V(internal 100 
          kΩ pull up)
          *1 The default interface is RS-422. Serial interface option must be defined during ordering.
          *2 Isolation of the case from the electrical ground is possible. Isolation option must be defined in the order!
          Table 5: Typical power consumption of the LRX-20A, LRX-2** & LRX-42A.
          Operation Total [W]
          Measure 3.7
          Optional Pointer 0.9
          Standby 0.2
          1Document number
          OS43418IE
          Document name
          Interface Control Document
          Version
          2.33
          Page nr.
          8 / 17
          3 Serial communication protocol
          This chapter describes the main command frames of laser range finder. Notice that all 
          commands described in earlier ICD document versions are still supported. 
          Default baud rate is 115200 bps (no parity, 8 data bits, 1 stop bit). Default electrical 
          interface is RS-422. RS-232 and UART are options. Serial transfer speed can be changed 
          by the user.
          After about 50 ms from the power on the device sends a string “LRX x.x.x” where “x.x.x” 
          is the firmware version (e.g. 1.5.3). After the string the device is ready to take commands. 

          標題:
          內容:
          聯系人:
          聯系電話:
          Email:
          公司名稱:
          聯系地址:
           
           
          注:1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
          2.如有必要,請您留下您的詳細聯系方式!

          鄂公網安備 42010502000348號

          99久久免费国产精品2021

          <big id="6sxgx"></big>

            <tr id="6sxgx"><option id="6sxgx"></option></tr>

            1. <center id="6sxgx"><em id="6sxgx"></em></center>

                <code id="6sxgx"><small id="6sxgx"></small></code>

                  <big id="6sxgx"><nobr id="6sxgx"></nobr></big>

                1. <code id="6sxgx"></code>